Genoa Car - Fits 32mm (1-1/4") T TrackFeature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is through-bolted and riveted for extra strength.A popular range of Genoa cars and sliders designed to run on a 32mm (1-1/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.Molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 32mm 'T' Section TrackDrilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths.Specifications and Dimensions: Length: 109mm (4.3") Width: 52mm (2.05") Height: 102mm (4.02") Sheave Ø: 50mm (1.97) Max Rope Ø; 2 x16mm (2 x 0.63") Break Load: 3,280kg (7,231.7lbs) SWL: 1,640kg (3,615.6lbs) Weight: 469g (1.03lbs)
$159.99$154.95
Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.Features: 'Spectro' grey anodized finish Anodized and supplied in metric lengths The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options Variety of applications on larger dinghies, dayboats, and light cruisers/racers Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 25mm 'T' Section Track Drilled for fastenings and plunger stops Specifications and Dimensions: Length: 80mm (3.15") Width: 42mm (1.65") Height: 87mm (3.43") Sheave Ø: 40mm (1.57") Max Rope Ø; 2 x 12mm (2 x 0.47") Break Load: 2,280kg (5,026.54lbs) SWL: 1,140kg (2,513.3lbs) Weight: 247g (0.54lbs)
$112.99$101.95
Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g
$14.99$12.95
Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards. A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 8"L WT: 0.1 lbs UPC: 5035088520015 Brochure (pdf)
$18.99$17.95
Waxed Whipping Twine - 0.5mm x 40M - White Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - White Material - Polyester (PES) Thickness - .02" (.5mm) Length - 131' (40 M) *Sold as an Individual Brochure (pdf)
$9.95$5.95
25mm Treble Block with Center BecketThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light. Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.32 can be used to create a 6:1 purchase system to aid in lifting heavier objects and decrease the load on the rope Specifications: Max Rope: 8mm Breaking Load: 1250kg
$54.78$43.95
25mm Single Block with V-JamThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light. Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.13 has a becket attachment to splice or tie off to, as well as a V Jammer This block could be used to create a 2:1 purchase system for lifting that can be easily locked off on the V Jammer Specifications: Max Rope: 8mm Breaking Load: 500kg
$34.78$27.95
Anti-Rattle Hasp & StapleThis hinge was fabricated from marine-grade 316 stainless steel and electro-polished for a long-lasting high finish. Features: The pins of the hasps and staples are welded in place for added security Anti-rattle Specifications:Closed Length: 78mm
$59.18$46.95
25mm Treble Block with ShackleThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light. Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.31 can be used to create a 6:1 purchase system to aid in lifting heavier objects and decrease the load on the rope Specifications: Max Rope: 8mm Breaking Load: 1250kg
$51.17$40.95
Bottom Transom PintleThe 4-hole transom mounted pintle is one of the most common and used transom fittings around. The fitting has 4 5mm countersunk fixing holes for attaching to the back of the boat. The pin is made from 316 stainless steel and is made to fit snugly with our gudgeon ranges. The pintle pin has a cross hole drilled so that an R clip or split ring can be used to secure the rudder to the transom fittings. Specifications: Fixing Holes Diameter: 5mm Weight: 0.022kg
$58.32$45.95
Hatch LockUsed to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Provision for a padlock.Features: Suitable for washboards up to 19mm thick The Only RORC-certified hatch lock Specifications:Weight: 0.2kg
$226.73$178.95
25mm Double Block with BecketThe 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light. Features: This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc. The 00.23 can be used to create a 4:1 or 5:1 purchase system to aid in lifting heavier objects and decrease the load on the rope Specifications: Max Rope: 8mm Breaking Load: 1000kg
$44.00$34.95
Tiller Lock Gun - GreyThis tiller lock maintains the rugged reliability of the original and brings the design fully up to date. Design suitable for any tiller-steered yacht or sports boat A simple mechanism allows the tiller to be set and adjusted, which is indispensable for short-handed sailing The innovative design incorporates a snubber, which holds a far better course than simply lashing the tiller A variety of methods for fixing or locking the tiller have been used over the years, and many have only been adequate. Improvements in performance involving short keels and dagger rudders are often transom-hung and suffer from an unfortunate handicap. With no skeg and no shelf, but with a sensitive rudder, a boat will fall off her elegant balancing act if the helmsman lets go of the tiller. The increased sensitivity and faster response of newer boat designs call for a better system. Such a system should:1. Allow precise locking of the tiller with minimum difficulty.2. Be quick and simple to operate when locking and particularly when releasing.3. If possible, the system should be able to be detached instantly from the tiller in the event of any emergency.This Tiller Lock rope lock was designed to meet these points. The device consists of a sheave and lever cam with a toothed slider mounted in a block that is fitted beneath the tiller. The rope is fitted across the back part of the cockpit as a means of keeping it under tension. When locked onto the rope, the toothed slider prevents the tiller from moving in either direction.Features: Releasing the lock (by turning the lever to port) immediately frees the tiller and allows the rope to ride freely over the sheave for manual steering In an emergency or when the device is not required, the rope can easily be snapped out of the block by a downward pull, clearing the tiller Specifications: Weight: 0.2kg Color: Grey
$90.09$70.95
12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Specifications: Length (mm): 48 mm Length (in): 1-7/8 in Width (mm): 18 mm Width (in): 11/16 in Weight (g): 28 g Weight (oz): 0.99 oz Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Fasteners (mm): 6 SH mm Fasteners (in): 1/4 SH in Maximum working load (kg): 908 kg Maximum working load (lb): 2000 lb Breaking load (kg): 1816 kg Breaking load (lb): 4000 lb Height (mm): 28.2 mm Height (in): 1-1/8 in A (mm): 32 mm Center hole Ø (mm): 12 mm Center hole Ø (in): 15/32 in
$39.95$37.95
Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards. A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 7"L WT: 1 lbs UPC: 5035088520008 Brochure (pdf)
$27.95
Small Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch. This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.Technical Specifications: Fits Drum Diameter - 2.5" to 2.75" (64 to 70 mm) Maximum Rope Diameter - .31" to .39" (8 to 10 mm) Weight - 7.13 oz (202 g) *Sold as a Pair Brochure (pdf)
$99.99$89.95
165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easy removal of the cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required and removed when not in use - reducing deck clutter and rope snags.Compatible With:.98" (25 mm) wide "T' Track slider systems Technical Specifications: Material (Cleat) - Nylon Material (Base) - Aluminum Dimensions (Cleat length) - 6.49" (165 mm) Weight - 4.73 oz (134 g) *Sold as an Individual Specifications: Color: Black Box Dimensions: 3"H x 3"W x 8"L WT: 3 lbs UPC: 5035088512539
$69.95
Stanchion Lead BlockBarton Marine's stanchion lead blocks have proven to be popular with Cruising sailors all over the World. Mounted onto the stanchion base, the stanchion lead block enables the Genoa furling line to be led back to the cockpit for easy adjustment. Ball bearing sheaves have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads. The unit will fully rotate about the swivel head to match your pulling angle. Block attachment to stanchion is by means of screwing together the integral Stainless Steel strap.Technical Specifications Sheave - Single Sheave Size - 1-3/8" (35mm) Maximum Rope Diameter - 5/16" (8mm) Safe Working Load - 815 lb (370 kg) Maximum Stanchion (Tube) Size - 1" (25mm) *Sold as an Individual Quick Guide (pdf)Brochure (pdf)
$29.99$27.95
Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines. The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully enclosed backing plate for a clean finish. Ideal for racers and cruisers alike. The Stanchion Bullseye has no moving parts so weight is kept to a minimum and no new holes are required in the deck. The superior, super smooth, hard-anodized finish on the high load eye provides low friction and excellent support for slick running lines, and excellent abrasion resistance for long-term service life. Making sailing life smoother.Compatible With: Stanchions up to 1" to 1.25" (25 to 31.75 mm) wide Maximum Rope Diameter - 3/8" (9.56 mm) Bore - .58" (16 mm) Dimensions (L x H x W) - 3.2" x 2.1" x 2.1" (79 x 55 x 55mm) Weight - 3.2 oz (90 g) *Sold as an Individual Specifications: Color: Black Box Dimensions: 3"H x 3"W x 6"L WT: 0.25 lbs UPC: 5035088087143 Brochure (pdf)
$40.99$36.95
Bulkhead Sheet Combination Bag - MediumThis Blue Performance handy storage bag is perfect for letting you store your winch handle, drinks, sun cream, etc.Features: Integrated Raincover Attach and remove using Blue Performance screw-in hooks Three compartments with mesh bottom Mesh front pouch Waterproof, mildew, and UV-resistant material Ripstop lining An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop Specifications (L x W):Medium: (inch) 15.2 x 10.8 x 4.3 / (mm) 385 x 275 x 110*Sold as an Individual Specifications: Type: Bags Box Dimensions: 3"H x 14"W x 18"L WT: 2.5 lbs UPC: 8717933038315
$91.95
Bow Shackle - 1/4" Pin - 13/16"L x 3/4"WFeatures: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head
$13.08$9.95
Quick Release Pin - 5/16" x 1" GripQuick Release Pin, 5/16" x 1.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs.
$13.70$10.95
Clamp-On Drink Holder - Single - TeakAdd an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features: Clamp-on to 1", 1-1/8" and 1-1/4" pipes Teak comes unvarnished (in order for you to match the teak on your boat) Specifications: Type: Drink Holders Box Dimensions: 4"H x 5"W x 7"L WT: 1.6 lbs UPC: 796744019995
$266.95
3/8" Pin Chainplate BentSpecifications: Pin Hole: 3/8" (10 mm) Max. Wire: 3/16" (5 mm) Fastener Holes: (4) 3/8" (10 mm) Length: 10" (254 mm) Width: 1-1/4" (31 mm) Thickness: 1/8" (3 mm) Weight: 6.6 oz. (187 g)
$96.90$65.95
$10.99$5.95
$15.95
$84.99$83.95
$59.99$51.95
$51.99
$133.99$85.95
$65.99$46.95
$20.99$12.95